1" Menggroep - met menger en regeling
1" Menggroep - met menger en regeling compleet
Bijvoorbeeld voor ontladen van een buffertank. Deze groep is voorzien van een digitale regeling welke de groep en een warmte bron kan aansturen.
LET OP! Moet nog thermostaat en kabel bij besteld worden. Neem contact op.
Korte technieche informatie:
- 1" binnen en buiten draad
- Tot 38 kW vermogen
- Thermometers zijn tegelijk afsluiters
- Compleet met menger en motor en regelaar
- Wilo Para 25/6 SC pomp (Wilo para 25/8 ook mogelijk)
- Isolatie maat 250 breed en 380 hoog
- Leidingen hart op hart 125mm
Geen voorraad, moet besteld vaak 2 tot 4 weken in overleg
Technische informatie fabriekant in engels uitgebreid:
BRV mixed pump group unit 20359R-M33-LHCP6
Climatic control pump unit for 1 or 2 circuits and heat request (heat source), DHW production or solar circuit; control of the cooling system. It is possible to connect one each other several hydraulic modules via CANBus
and to connect the °Caleon room room controller. The pump unit, by acquiring the value of the outside temperature, settles the right supply temperature of the installation on the base of the set climatic curve. The
unit is supplied completely assembled and tested. No wiring operations are needed: the circulating pump, the actuator of mixing valve and the climatic controller are pre-wired for a pratical and effective installation.
The unit for 1” (180 mm) circulating pumps consists of:
Supply
• Connection.
• Isolating flanged ball valve with unions.
• 3-way mixing valve with 3 point actuator and adjustable by-pass. Through the by-pass (adjustable from the front part) it is possible to mix on the supply line a quantity of water coming back from the return line of the system.
• High efficiency synchronous circulating pump: Wilo Para SC with 6 m or 8 m head.
• Flanged ball valve supplied with in-handle thermometer (red ring, range 0°C-120°C).
Return
• Flanged ball valve with 20 mbar check valve (which can be excluded by rotating the handle by 45°) supplied with in-handle thermometer (blue ring; 0°C-120°C).
• “T” connection for mixing valve.
• Isolating flanged ball valve with unions.
• Connection.
Centre distance 125 mm.
EPP insulation box (Dimensions: 250x466x215 mm).
A special back plate fixes the unit to the insulation box and allows a quick fitting to the wall or to the buffer tank.
PN 10, max temperature 110°C
External connections: 1” Female.
FIELD OF USE
For power up to 38 kW (with ∆t 15 K) and maximum flow rate 2200 l/h.
Kvs Value: 7.0.
Approximate data calculated with a Wilo Para SC 25/6 circulating pump (6 m head).
For power up to 20 kW (with ∆t 8 K) and maximum flow rate 2200 l/h.
Kvs Value: 7.0.
Approximate data calculated with a Wilo Para SC 25/8 circulating pump (8 m head). For an accurate sizing or for higher flow rates, please refer to the curves shown in the technical section.
