1" ongemengde pompgroep met warmte meter optie
1" ongemengde pompgroep met warmte meter optie
Bijvoorbeeld voor laden indirect gestookte boiler of warmte transport en het bemeteren hiervan.
Korte technieche informatie:
- Linker kan/buis heeft warmte meter optie
- voorzien van afsluiter met sensor aansluiting (zie foto)
- 1: binnen en buiten draad
- Tot 50 kW vermogen
- Thermometers zijn tegelijk afsluiters
- Geen temperatuur regeling
- Wilo Para 25/6 SC pomp (indien gewenst ook Grundfos UPM3S Auto 25-60 of Wilo Para 25/8 SC
- Isolatie maat 250mm breed en 380mm hoog
- Leidingen hart op hart 125mm
Geen voorraad, moet besteld vaak 2 tot 4 weken in overleg
Technische informatie fabriekant in engels uitgebreid:
BRV pump group unit 203518-P6-20
The unit for 1” (180 mm) circulating pumps consists of:
Supply
• Connection.
• Flanged ball valve with T-handle.
• High efficiency synchronous pre-wired circulating pump (for the models that include it).
• 3-way flanged ball valve supplied with in-handle thermometer (red ring, range 0°C-120°C). The third way M10x1 allows the dip fitting and the lead sealing of a ø5x45 mm sensor.
Return
• Flanged ball valve with 20 mbar check valve (which can be excluded by rotating the handle by 45°) supplied with in-handle thermometer (blue ring; 0°C-120°C).
• Distance piece made of plastic 1”x130mm that has to be removed, after having cleaned the installation, to fit the heat/cooling energy meter
• Flanged ball valve with T-handle.
• Connection.
Centre distance 125 mm.
EPP insulation box (Dimensions: 250x380x170 mm).
PN 10, max temperature 90°C.
External connections: 1” Female.
FIELD OF USE
For power up to 50 kW (with ∆t 20 K) and maximum flow rate 2150 l/h (*).
Kvs value: 8.0 (*).
Approximate data calculated with a 6 m head circulating pump.
For an accurate sizing or for higher flow rates, please refer to the curves shown in the technical section.
(*) The data are relevant to the pump unit without circulating pump and without heat/cooling energy meter installed.
